background image

Incorrect operation and improper use can damage the 
appliance and cause injury to the user. 

This device, designed for home use, complies with standards 
relating to this type of product. 

 

(*)

 Competent qualified person

 : after sales department of the 

producer or importer or any person who is qualified, approved 
and competent to perform this kind of repairs. 

 

• Do not attempt to remove the kneading arms or whips at the 
start of the unit.  
• Robot cannot be used to mix dry and hard foods. it may 
damage the used arm.  
• The whip is to be used only for whites egg or liquid culinary 
preparations consistency. In use for a hard paste, it may be 
permanently damaged.  
• Before removing, the unit's motor must be completely stopped, 
and unit unplugged.  
• Always use the button to control the opening or closing of the 
robot arm.  
• Keep hands, clothing, moved away from kneading arm during 
operation to reduce the risk of injury and damage.  
• Use a spatula to remove the food.  

 

GENERAL INFORMATION 

 
The symbol "OPEN BOOK" means a recommendation 
to read important things contained in the record. 
 
The symbol "BIN" crossed out, abbreviation WEEE 
(Waste of Electrical and Electronic Equipment) means 
that at the end of life, it should not be discarded with 

 

Summary of Contents for TRO-1050















Reviews: