● Do not use the appliance to work hard ingredients (frozen meat, crusts of
cheese…), rubbery (candied peel…), and uneatable parts of ingredients
(bones, fishbone…).
● Never replace accessories without switching off the appliance and if the
accessory being used has not stopped working.
● Do not remove the ingredients from the bowl before removing the accessory.
Kneading function
Before using the kneader, make sure that the power cord is unplugged and
that the speed selector is in the "0" position.
Press the open / close button then raise the upper part of the robot.
Install the bowl lid (1) on the spindle.
Turn clockwise to secure.
Install the bowl on its base (2).
Turn clockwise to secure.
Install the accessory (whip or hook or
beater) on the axis of the robot by engaging
it in the axis (3).
Turn counter-clockwise (left) to lock.
Lower the top of the robot.
Check that it is properly secured before turning it on.
Note: make sure the bowl lid is in place.
Pour the ingredients into the bowl. (Or pour them before attaching the bowl).
Connect the unit and turn the speed selector to the desired speed.
9
