Notes on Handling Batteries
• Keep batteries out of the reach of children.
• Replace old or weak batteries promptly.
• Remove the batteries if the mouse is not going to be used.
Safety Measures
• Keep the mouse away from young children.
• Any attempt to disassemble, adjust or repair the mouse may result
in explosion and other safety hazards.
Specifications
Button Count:
3 buttons
Operating Frequency:
2.4GHz
Number of Channels:
34
Resolution:
1000/1500/2000DPI
Receiver interface:
USB version 2.0
Operating Voltage:
1.5V
Operating Current:
6.8mA
Distance:
up to 10m
Troubleshooting
What do I do if the mouse does not work?
• Make sure that the polarity of the batteries is correct. The positive
(+) and negative (-) ends of each battery must match the positive
(+) and negative (-) markings in the battery housing.
• Make sure the batteries are not discharged.
• Please try to remove the batteries, and reinstall the batteries again.
• Verify that your computer's power management features are turned off.
• Check that the Nano receiver's USB connector is firmly attached to
the USB port of your computer.
• Still not working? Please try restoring the factory default settings
(Manual Syncing Steps)
The USB Nano receiver is recognized by Windows (Windows 2000
/2003/XP/Vista/Win 7/Win 8/Mac10.x) but the cursor does not move.
4. The mouse might not work smoothly on some special surfaces,
such as smooth, dark black, reflecting and 3D mouse pads surfaces.
5. Please avoid using the mouse on a metal surface. Metals, such as
iron, aluminium or copper, shield the radio frequency transmission
and may slow down the mouse presenter’s response time or cause
the mouse to fail temporarily.
6. If your PC has a metal case that contains aluminium or magnesium,
use the mouse to the side. The display panel may interfere with the
radio frequency signal if you use the mouse directly in front of the PC.
7. Please remove the batteries if you are not going to use it for a while
(several weeks or months).
EN
