29
3. Press Start/Pause to commence the Delay operation.
Cancel the Delay function: Press the Delay button until the light will be off (0-Led products ) and
press the Delay button until the display will to be 0h ( Lcd and Led products) . Notes: If there is
any break in the power supply while the machine is operating, a special memory stores the
selected program and when the power is restored, it continues where it left off.
- Drum Clean
This cycle is specially set in this machine to clean the drum and tube. It applies 90°C high
temperature sterilization to make the clothes washing more green. When this procedure is
performed, the clothes or other washing cannot be added. When proper amount of chlorine
bleaching agent is put in, the barrel cleaning effect will be better. The customer can use this
procedure regularly according to the need.
- Suppression of the acoustic signals
This is an additional buzzer function on your appliance. After deactivating the buzzer function,
the buzzer will be closed. After starting the machine, press the “Temp.” button for 3 seconds and
you will hear a beep, then the buzzer will be closed. To restore the buzzer function, press the
“Temp.”button again for 3 seconds. The setting will be kept until the next reset.
Warning:
After deactivating the buzzer function, the sounds will not be activated any more
before you reset it.
- Lock Protection for Kids
To avoid that the washing procedure cannot operate normally due to the mis operation by kids
during the washing procedure, you can select this function, In this case, the other buttons except
Power button can not work, at this state ,the machine power off when press the key power. The
machine remembers the program child lock and the program during powered off when press the
key Power again.
Press delay and spin together 2.5 seconds during the running procedure, the buzzer will beep
and Pre wash, accessary function,Start/Pause button as well as the rotary switch are locked.
Press the two buttons for 2.5 seconds together and buzzer will beep to release to locking. But cut
off the power supply , the kid’s protection is also release to locking. The kid’s protection will not
be cancelled after all procedures are completed. When lock protection for kid’s takes effect,
press the button non kids and buzzer will give an invalid reminding.
- Option
“^”and “
ˇ
”keys is use to choice the extra function. The function of the corresponding display icon
is flashing (0.5 sec. on and 0.5 sec. off)when choose any additional functions ( follow to the
program table) .
- Bubble Removal Function
Bubble Check Function: Redundant bubbles will occur when there is excessive detergent, which
will affect Wash and Rinse effects. The procedure will check automatically and one bubble
removal procedure will be added automatically to remove bubbles when excessive bubbles are
checked. It will also remind the user to use less detergent during the next similar washes.
