background image

INSTALLATION 

 

 

 

 

 

 

 

 

 

 

 
If the flame on either the top burners or the grill show a tendency to lift, it is probable that 
the line pressure is too great. Should there be excessive yellow tips (resulting in sooting) 
then it is probable that the line pressure is too low and, in either case, the burners should 
not be used until the line pressure has been checked. 
This appliance is fitted with the following injectors:- 
 
                                            

          BURNERS       0.62mm 5.4 MJ/h 

                                                      GRILL              0.62mm 5.4 MJ/h 
 

 

 

 

 

OVEN  

   0.59mm 4.8 MJ/h

 

 
The burners on this appliance have fixed aeration and no adjustment is necessary. 

 

 

 

 

 

 

IMPORTANT 
 

 

After installation the appliance MUST be tested for soundness 

 

Test ALL burners on high and low flame for flame stability. 

 

The gas supply input pressure MUST not rise or fall significantly from 
nominal when ALL appliances connected to the supply are operated 
simultaneously. If NOT installed to the manufacturers instructions detailed 
herein, we the manufacturer can not be held responsible for any problems 
that occur, or poor performance that is perceived/witnessed. 

 

When satisfied with the appliance, please instruct the user on the correct method of 
operation. If the appliance fails to operate correctly after all checks have been made, refer 
to the authorised service provider in your area. 

 

 

 

7

Summary of Contents for NELSON












Reviews: