background image

 

ATEX heating kit – Air System 

Assembly instruction

 

Pagina 

2

 di 4 

Istruzione n° 

220

 - Rev. 

00

 del 05/11/2018

 

EN 

 

Copyright © 2018 Tecmec S.r.l. 

ISTRUZIONI ORIGINALI

 

WARNING 

Consider the size and weights of the various components that will be moved. 

Is fundamental constraint that the below mentioned installation steps are carried out by least 

two people with safety gloves and shoes. 

In case of already installed cabinet, empty and move it from wall. 

1.

 

Remove the 
four internal 
screws of the 
rear panels.

 

 

2.

 

Loosen the 
screws that 

lock the rear 
panels. 

3.

 

Lift the back 

panels and 
remove them

.

 

 

 

4.

 

Unscrew the three screws and remove the stirring shelf protection (if the agitation option is provided). 

 

5.

 

Insert the slotted holes of the six sides on the 

screws that before fixed the rear panels

.

 

 

 
 

 
 

 
 

 

 
 

 
 

6.

 

Loosen few millimeter the four screws on the cabinet 

sides. 

 
 

 

 
 

 

 
 

 

 
 

 

 

Summary of Contents for ATEX

Page 1: ...N Copyright 2018 Tecmec S r l ISTRUZIONI ORIGINALI ATEX heating kit Air System Assembly instruction The heating kit is a option of Air System cabinet this instruction refers to assembly of kit only For use safe spare parts and others informations see the IST 216 Air System cabinet handbook on the CD ROM ...

Page 2: ...d out by least two people with safety gloves and shoes In case of already installed cabinet empty and move it from wall 1 Remove the four internal screws of the rear panels 2 Loosen the screws that lock the rear panels 3 Lift the back panels and remove them 4 Unscrew the three screws and remove the stirring shelf protection if the agitation option is provided 5 Insert the slotted holes of the six ...

Page 3: ...e keep 3 4 mm between the screw head and the shelf 8 Hook the heater to lower module 9 Check the hooking correct of heater 10 Insert two Ø4 8x9 5 side screws and tighten all screw 11 Fix the heater to module using two Ø3 9x13 screws 12 Assemble the rear cover of heater using nine Ø3 9x13 screws 13 Loosen at some millimeter the two screws on the right of second shelf 14 Hook the thermostat plate an...

Page 4: ... for break the bigger joint 17 Hook the panel to the lower screws of cabinet and fix it with six Ø3 9x13 screws 18 Fix the thermostat plate using a Ø4 8x9 5 black screw 19 Assemble the upper panel using nine Ø3 9x6 5 screws 20 Hook the panel to the upper screws of cabinet 21 Pay attention to insert the metal tab in the lower panel slot 22 Put the others six Ø3 9x13 screws for fixing of the panel 2...

Reviews: