ATEX heating kit – Air System
Assembly instruction
Pagina
3
di 4
Istruzione n°
220
- Rev.
00
del 05/11/2018
EN
Copyright © 2018 Tecmec S.r.l.
ISTRUZIONI ORIGINALI
7.
Insert two Ø4.8x9.5 black screws in central holes in the
shelf of lower module, keep 3-4 mm between the
screw head and the shelf.
8.
Hook the heater to lower module.
9.
Check the hooking correct of heater.
10.
Insert two Ø4.8x9.5 side screws and tighten all screw.
11.
Fix the heater to module using two Ø3.9x13 screws.
12.
Assemble the rear cover of heater using nine Ø3.9x13
screws .
13.
Loosen at some
millimeter the
two screws on
the right of
second shelf.
14.
Hook the
thermostat plate
and tighten the
two screws.
9
10
13
14
