Tecnet HL-1500, Owner'S Manual

L

AND

M

OBILE

R

ADIO

HL-1500 SERIES

L

AND

M

OBILE

R

ADIO

HL-1500 SERIES

Operation

14

13

6) 2TONE ANI 

This function transmits a 2TONE signal when-
ever the PTT button is pressed.
Select the 2TONE ANI function by pressing the
"Function" button 6 times, the icon "     " will
begin flashing. Select On/Off by pressing the
Up/Down buttons. The selected function will be
stored automatically. If no buttons are pressed
within 5 seconds after selecting functions, the

You should turn off the 2TONE ANI during
the general communication. Otherwise,
receiving transmission can be unavailable.

monitor will revert to the main display. Press the PTT button to finish
and exit the function mode. This function works only if the selling dealer
has programmed the radio for this. The radio will receive only when a
2TONE signal is sensed. Radios will communicate with each other only
if both are using 2TONE signals. For general communication with other
radios regardless of 2TONE, switch this function off.

4) KEY LOCK 

This function locks the channel currently in use
and prevents other channels from being
accessed. Press the "Function" button 4 times
to set up 'Key Lock', the key icon "    " will begin
flashing. Select On/Off by pressing the Up/Down
buttons. The selected function will be stored
automatically. If no buttons are pressed within 5
seconds after selecting functions, the screen
will revert to the main display. Press the PTT
button to finish and exit the function mode. To
release the Key Lock function, press and hold
the Function button for two seconds.

5) DTMF 

This function serves to alert for incoming mes-
sages. Set up the DTMF Transmission by press-
ing the "Function" button 5 times. The icon "     "
will begin flashing. Select On/Off by pressing the
Up/Down buttons. The selected function will be
stored automatically. If no buttons are pressed
within 5 seconds after selecting functions, the
screen will revert to the main display. Press the
PTT button to finish and exit the function mode. 
If DTMF is on, the unique sound of DTMF will be
heard whenever the PTT button is pressed. 

Operation

Press the 'Function' button
5 times.

Press the 'Function' button
6 times.

3) SETTING BEEP SOUND 

This function confirms that the buttons are prop-
erly pressed with the beep sound. 
Press the "Function" button 3 times to select the
beep sound. The icon "     " will be flashing.
Select On/Off by pressing the Up/Down buttons.
The selected function will be stored automatically. 
If no buttons are pressed within 5 seconds after
selecting functions, the screen will revert to the
main display. Press the PTT button to finish and
exit the function mode.

Press the 'Function' button 
3 times to select the beep
sound.

Press the 'Function' button
4 times to set up 'Key Lock'.