G
]
1. Power On & Off
- Set the HOLD switch to “Off” mode and press the REC/STOP button for about one second.
Then, LCD is displayed, which means power on.
- Automatic power off : the unit will be automatically turned off within one minute when not in use
without pressing any button.
2. Recording
- Release the HOLD switch and press the REC/STOP button for recording.
- The unit starts recording when the red LED lights ON.
(The unit displays the recording number, level and time on the LCD.)
** Recording Time Indication on the LCD
- To stop recording, press the REC/STOP button again.
1) Pause
function
- Press the MODE/PAUSE button during recording.
- The “PAUSE” letter blinks in LCD display, which means pause function is operated.
- To release the pause function, press the MODE/PAUSE button one more time.
2) To record on the following number during recording
- During recording, move the
button upwards and then, you can continue to record on the
following number.
3) Indication of the remaining recording time
- If you press the FOLD/REPEAT button during recording, the LCD indicates the remaining time.
4) Monitoring
of
recording
- You can listen to the recorded messages by connecting earphone to EAR jack during recording.
(During monitoring, the volume level can not be controlled.)
5) Using an external pin microphone (Optional)
- Record after connecting an external microphone to MIC jack located on the left side of unit.
minute
second
hour