G
^
3. Playback
- Release the HOLD button and select your desired message number by moving upwards(
) or
downwards(
) the button located on the top/side of unit.
- If you press the
/
button to vertical direction, the LED lights in Green color to playback the
recorded message.
- During playback, you can stop the unit by pressing the
/
button to vertical direction one more
time.
(Resume Play)
If you re-play just after pressing stop button, playback will be proceeded continuously from the pre-
stopped time. (If another button except for the
/
button is pressed at stop mode, the fore part of
the last recording message will be played.)
1) Fast-forwarding(
) and rewinding(
) during playback
- You can adjust the playback time by moving the
or
button upwards or downwards long
enough during playback.
- If you wheel the
or
button shortly, you can hear the following recorded message or
previous recorded message.
2) Converting message during playback
- You can adjust by wheeling the button (
/
) upward or downward.
3) Scanning
- At stop mode, press the
/
button for more than 2 seconds.
- Then, “SCAN” will be displayed and the unit will playback each message for about 5 seconds in
sequence from the first message to the last message.
- After playback of all messages in one folder, the unit stops to playback and if you press the
/
button, the unit stops operation.
4) Repeating the section playback
- During playback, press the FOLD/REPEAT button which means the repeat function is being started.
Then, if press the FOLD/REPEAT button again after a certain time, the repeat function is
completed Which means the repeating time is set-up and the unit will continue to repeat in the
selected section.
5) Indication of the remaining playback time
- If you press the FOLD/REPEAT button one time during playback, the LCD indicates the
remaining time.
