16
USER AND MAINTENANCE MANUAL
Refrigerated PIZZA COUNTER TN
Product line
- EKO — 700 GN 1/1 / - MID — EN 800
Refrigerated VETRINA PIZZA TN GN 1/4 - GN 1/3
INTRODUCTION
The appliances called “Refrigerated PIZZA COUNTER” and “Refrigerated VETRINA PIZZA” were
manufactured in accordance with all EC regulations regarding free movement of industrial and
commercial goods in EEC countries (see “Directive on Electromagnetic Compatibility” – DIREC-
TIVE 2004/108/EC of the European Parliament and of the Council; see “Directive on Low Voltage” –
DIRECTIVE 2006/95/EC of the European Parliament and of the Council). The appliances conform to
directive EU2002/95/EC – RoHs.
Therefore, the units are supplied with all the documentation imposed by such standards.
The manufacturer has devised the appliance with th e intent of ensuring a safe use. Excluding any ele ctrical safety
devices or disassembling the manufacturer’s protection devices will seriously compromise the aforesaid safety condi-
tions. Furthermore, these conditions are subject to compliance of installation instructions and power supply require-
ments for the unit, which must be strictly followed. The appliance must be used according to the specifications of this
manual. It is therefo re highly advisable to carefully read a ll installation procedures, start-up procedures and/or re-
moval procedures (when the appliance is moved and relocated to another position).
It is also advisable to pay particular attention to all t he instructions specified herein. T he conformity of all the stan -
dards and gu idelines will ensu re a safe use of the a ppliance and appropriate handling.
Maintenance operations
can be carried out by a specialised technician by following a few simple operations
. For maximum durability
and best operating costs, it is advisable to scrupulously follow the guidelines prescribed herein.
USING MANUAL
The user and maintenance manual constitutes an integral part of the refrigerated table.
It must be kept intact
and in a safe place for th e entire life of the appliance, even if the appliance is transferred to another user or owner.
The manual must be easily be located by operators and maintenance staff and must be placed nearby the unit.
The appliance includes all documentation required by regulations in force, whi ch are met during the planning and
manufacturing phase. All the instructions prescribed on this manual must help the operator and the qualified techni-
cian to conduct all installation procedures, connections, use and maintenance of the system, in a safely manner and
correctly. This user and maintenance manual contains all the information required for handling the unit with particular
attention to safety.
MANUAL PRESERVATION
It is advisable to use the manual with care and in such a way as not to compromise its contents.
Under no circumstances shall the user remove, pull out or rewrite any parts of the manual.
Keep the manual in a place protected against humidity and heat. The instruction manual shall be kept nearby the unit
so that operators can easily consult the manual. The manual must also return to its location after each consultation.
Furthermore, the manual must be kept for the entire life of the appliance and must be handed over to any successive
user or owner.
The company will not be held liable for any breakage, accidents or faults due to non-compliance,
including non-compliance for not following the instructions of this manual. Moreover, the company will not
be responsible if the user makes any modifications, variants or if non-authorised accessories are installed in
the unit.
THE MANUFACTURER RESERVES THE RIGHT TO MAKE TECHNICAL MODIFICATIONS
TO ITS OWN PRODUCTS WITHOUT GIVING PRIOR NOTICE.
EN
Summary of Contents for GN 1/3
