19
1___POSITIONING THE UNIT
Before unloading/loading and before positioning the unit inside the point of sale, please make sure to carefully read all
the sections
concerning loading/unloading procedures of the unit, including lengths, weights, condensed-water container drain-
age, positioning adjustable feet and the unit’s electrical board described on this user and maintenance manual.
1_10_____
TRANSPORTATION
Do not place the unit one above another (this can only be done if units are packed in a cage).
It is advisable to transport the refrigerated table solely in vertical position (see top-bottom markings
on the box). In the event that the refrigerated table, fitted with a built-in condenser is tilted, make
sure to wait at least eight hours before starting the unit.
This time will allow the oil to flow into all the
unit’s components, lubricating all the parts once again; the unit can be started once this process is com-
pleted.
1_15______UNLOADING THE UNIT / SIZES / WEIGHT
Unloading / loading of the product, must be performed by authorized personnel and authorized person-
nel. The company disclaims any responsibility for failing to follow safety rules in force.
Depending on the type of the model, make sure to carefully
consult the information on the table regarding
lengths and weight before unloading,
positioning or installing the refrigerated table inside the point of sale.
Do not place the unit one above another (this can only be done if units are packed in a cage).
1_20________PACKAGING
Upon delivery to verify that the packaging is intact and that during transport has not been damaged.
Remove the outer box from the table unit, remove the locks that fix the unit into the pallet, position the unit and re-
move the steel protection adhesive film.
Collecting and recycling package materials such as plastic, iron, carton and wood will help save raw materials and cut-
back on waste.
Please contact the relevant authorised recycling and waste disposal centre available in your area.
1_25_______CONDENSED-WATER DRAIN / DRAIN CONNECTION
The refrigerated display cabinets are available in the following versions:
Version fitted with built-in refrigeration unit:
The refrigerated display cabinet includes automatic re-evaporation of condensed water with adjustable defrosting time.
Version made-ready for remote units:
The display cabinet for “SALINA line” models are fitted with a drain hose and U-trap for connecting to the water drain-
age network (to be carried by the client). See chapter on “table unit versions for adapting to remote units”.
The refrigerated display cabinet must never be installed without a U-trap, each drain must have a U-trap.
For additional information, please see chapter on TECHNICAL DATA “TYPE OF VERSIONS”.
K g
K g
N O
S I
EN
Kg
USE AND MAINTENANCE MANUAL
