EN |
SERIE M
| User and Maintenance Manual
30
1 POSITIONING
Before to unload/download and positioning the Refrigerated Serve-over Displays inside the shop/
kitchen, you are kindly invited to read carefully this instruction manual
you are kindly invited to
read carefully this instruction manual
especially the chapters regarding: unloading/loading, dimensions,
weight, evaporating water basin, adjustable feet, electric connections and maintenance procedures.
1.1 TRANSPORT
Kg
Kg
NO
SI
Do not superimpose Refrigerated Serve-over Display packing (allowed
only if there is wooden crate packing option).
We recommend you to transport the Refrigerated Serve-over Display always in the
horizontal position (as mention on the packing). If the Refrigerated Serve-over Display
with built in condensing unit was inclined during transportation we suggest you to keep
the product in the suggested upright position for at least 8 hours, before switching it on.
In this way, you will allow the oil to flow in all the components, lubricating them again.
Afterwards you can proceed with the start.
1.2 DOWNLOAD - UNLOAD / LENGTHS / WEIGHTS
Kg
The unloading/loading procedures should be executed by pallet-jack or by forklift
driven by skilled and authorized staff. We decline any liability for failing to comply
with safety rules currently in force.
Before starting the unloading, positioning and installation procedures of the Re-
frigerated Serve-over Display
inside the shop/kitchen according to the model of
the Refrigerated Serve-over Display, please read carefully the information in the
technical "APPENDICE - 5" pag. 58.
Do not place the unit one above another (this can only be done if units are packed in a wooden crate).
The manufacturer declines any responsibilities due to operations performed without adopting the abo-
ve safety precautions.
1.3 PACKING
At the delivery please
check that the packing is intact and that during transportation no damage
was occurred
. Remove the external carton-box; remove the fastener that keeps still the Refrigerated Serve-
over Display to its pallet, put it in the correct position and then remove the adhesive white protection of the
stainless steel.
The recovery and the recycling of the packing materials such us, plastic, iron, carton box, wood help the saving
of row material and reduce the waste. Please consult your area address book for disposal of materials and
authorized garbage dump.
1.4 POSITIONING AND FEET REGULATION
Place the Vertical Multi-deck Display in a perfect horizontal position, acting if necessary
on the screw type adjustable feet. Use a spirit level to check it. The Vertical Multi-deck
Display must be placed in order to operate properly and allow the correct defrost
condensate water draining. In this way you will avoid noisy vibrations of the condensing
unit. Check the correct positioning of the condensate water basin and its draining.