SERIE M
| User and Maintenance Manual | EN
31
1.5 INSTALLATION INSIDE SHOP/RESTAURANT/WORKROOM
The equipments are tested in test-room with ambient temperature of +25°C and relative humidity
60%
, therefore, if the ambient in which the equipment is installed has different conditions of ambient temperature
and relative humidity, it could be verified a malfunction and the equipment will not run properly (making inside
condensation….etc). It is advisable to install the equipment inside an area with an air conditioning system. Please
note that malfunctions may arise in areas that are not provided with air conditioning, e.g. condensation formation.
ATTENTION
In order to allow a good functioning of the
equipment please pay attentions to the following instruc-
tions:
•
Do not place the unit in an area directly exposed to sun light or to other heating sources,
such as
high intensity incandescent lighting systems, ovens or other radiant heating sources, e.g. heating radiators etc.
•
Do not place the unit nearby door openings producing air currents,
whether doors or windows
or directly exposed to air from fans, vents or fan coil unit air conditioner.
•
Do not block or obstruct the air inlets
of the built-in refrigeration unit
.
•
Do not place any objects on the unit,
including boxes or any other type of objects; leave the entire
perimeter of the unit completely free so that air can circulate properly
.
•
Do not place the equipment inside areas with high relative humidity levels
(it may cause forma-
tion of condensation)
•
Do not place the equipment inside a closed niche,
as there is not enough air circulation and may
cause the refrigeration unit to not work properly.
•
Do not place the unit one above another.
•
Verify that the room in which the equipment is placed must be sufficiently aired,
even when the shop is closed.
Verify that in the installation room there is enough air turnover, even during closing and rest hours. In
this way the expansion/condensing unit will work correctly.
•
Keep a MINIMUM distance 60 cm from of the grille on the motor side
•
Keep a MINIMUM distance of 10 cm from the back of the unit from the wall, so as to prevent
the formation of condensate.
INSTALLATION MINIMUM DISTANCE
In order to allow a good performance of the equipment, during the installation you must respect the MINIMUM WALL
distances as showed on the drawings.
