I.T.S. Ital Trade Services srl ST 1200 Operating Manual
5
Description
The ST 1200 is designed and fabricated in order to cut pipes in different kind of thermoplastic
materials such as: PP, PE, PVC, and PVDF from diameter 500 mm till 1200 mm
The cutting angle could be changed from 30,0° by means of turning the pipe holder to the left , and
68,0° by means of turning the pipe holder to the right.
The special designed hydraulic clamp hold safety the pipe.
a.
Pipe clamp
b.
Arch
c.
Lifting hook to be used during the arch assembly on the machine
d.
Arch guide
e.
Warning lamp
f.
Blade protecting carter
g.
Saw blade stretch adjustment nut
h.
Hydraulic unit
i.
Blade’s sliding guide
j.
Adjusting angle cut system
k.
Pipe’s roller
Figure 1. ST1200 components description