I.T.S. Ital Trade Services srl ST 1200 Operating Manual
9
b. Controls description
All the controls are located on the control panel
1.
White light
line light
2.
Yellow light
Blade engine overheating light
3.
Yellow light
Hydraulic unit engine overheating light
4.
Green light
Broken or slack blade light
5.
Green light
Blade case door open light
6.
Key selector
To select the different sawing mode
7.
The blue Light Push Button
Safety switches on (Once pushed does not permit the
unsafe start of the saw blade)
8.
The White light push button
This button resets the machine
9.
The Blue Push Button
this button locks the clamp
10.
The Blue Push Button
this button controlling the arch up stroke
11.
The Green Light Push Button
this button starts the saw blade
12.
The Emergency Push Button
this button stops the machine
13.
The Black Push Button
this button unlocks the clamp
14.
The Black Push Button
this button controlling the arch down stroke
15.
The Red Push Button
this button stops the saw blade
16.
Wheel
Controlling the blade rotation speed
17.
Wheel
Controlling the arch down stroke speed
Figure 2. Control panel