EN
PART 2 - Use and maintenance
SOLID TOP ACTIVATION, USE AND DEACTIVATION
Press the switch above the appliance.
Turn the knob |
A
| fig.2 anticlockwise from position |
0
| to the desired
position aligning the number with the control panel marker; at the same
time, the indicator light |
L
| fig.1 will illuminate to indicate that the solid
top is on.
When in position |
∞
|, the appliance has reached the maximum
temperature.
To turn off the appliance, take the knob back to position |
0
|.
Disconnect the switch above the appliance.
ELECTRIC OVEN ACTIVATION, USE AND DEACTIVATION
Operation of heating elements is controlled by a 4-position selector,
whilst the internal chamber temperatures are controlled by a
thermostat (60-300°C).
The selector allows you to choose the most suitable heating mode
subsequently activating the correct heating elements.
Turn the knob |
B
| fig.2, heating element control selector to one of the
enabling positions.
Illumination of the green indicator light |
S
| fig.2 indicates that the
machine is powered.
Turn the thermostat knob |
C
| fig.2 until you reach the marker which
displays the desired cooking temperature.
Illumination of the orange indicator light |
O
| fig.2 indicates that the
heating elements are operational.
The oven door must be closed during all cooking procedures.
To turn off the oven, take the knobs |
B
| and |
C
| back to position |
0
|,
disconnect the switch above.
Knob | C | - Positions/temperatures
0
60 C° 120 C° 150 C° 180 C° 210 C° 240 C° 270 C° 300 C°
Knob | B | - Positions
0
Off position
Upper and lower heating elements
Grill upper heating element
Lower heating elements
Fig.2
Turning the electric ventilated oven on (only mod.PF_V7)
Turn the knob |
D
| fig.3 of the thermostat until you reach the desired
cooking temperature.
The green indicative-light |
E
| fig.3 will turn on to indicate that the oven
is supplied with power.
The orange indicative-light |
F
| fig.3 indicates that the heating elements
are working.
Knob | D | - Positions/temperatures
0
100 °C
150 °C
200 °C
250 °C
295 °C
Fig.3
SAFETY THERMOSTAT - ONLY WITH MODEL PPF_
The appliance is equipped with a safety thermostat that cuts off the
electric power supply in case of anomalies or overheating. To turn the
appliance on again, remove the control panel, extracting the screws
located in the lower part, and press the button |
E
| fig.2.
This operation must be carried out by a specialised technician.
Summary of Contents for TECNO70
Page 4: ...Fig 2 Abb 2 рис 2 ...
