July-2015
21
– uSE –
6.3 - POSITION OF THE SPRAyER PARTS
6.3.1 - ADJUSTING THE POSITION OF THE SPRAY GUNS
To change the position of a gun (1):
• to slide the gun on its support:
4.
Loosen the locking screw (2),
5.
slide the clip support bracket (3) to the
selected position
6. re-tighten the locking screw.
• To adjust the orientation of the gun:
1.
Loosen the pipe clip fixing screw (4),
2. angle the gun as required,
3.
re-tighten the screw (4).
Fig.7
1
4
2
3
NOTE
Turn over the slide (1) for other adjustments
T
he slide has two attachment points (2) and (4) for:
•
the joint flat
• the
Telesit electrical cylinder (optional)
Fig.8
1
to turn the slide over (1):
1. R
emove the bolts (2) and (3),
2.
turn the slide over, (1)
3.
replace the bolts, using the
attachment point (4).
2
1
3
4
Fig.9
Summary of Contents for RAMPE VITIFIX
