July-2015
22
– uSE –
6.3.2 - ADJUSTING THE UPPER HANDS
6.3.2.1
Hands 2 or 3 upper fingers
To change the position of a lower hand,
• To adjust the height of the hand:
1.
Loosen the locking screws (1)
2. slide the hand support o the desired
direction
3. re-tighten the locking screws.
• To adjust the width of the hand:
1.
Loosen the clamp screw (2) on the clip
support bracket,
2.
slide the bracket and hands assembly in
the desired direction,
3. tighten the clamping screw on the pipe
clip support bracket.
• To adjust the orientation of the hand,
1.
Loosen the pipe clip fixing screw (3),
2. position the hand,
3.
re-tighten the screw (3).
Fig.10
2
1
3
6.3.3 - ADJUSTING THE POSITION OF THE LOWER HANDS
6.3.3.1
Hands 3 or 4 lower fingers
Ö
Vinis - Duo
To modify the position of a
lower hand (8)
• To adjust the width of the hand:
1.
Loosen screw (J) on the pipe clip,
2. Slide the hand in the desired direction,
3.
Tighten the pipe clip securing screw (J)
Fig.11
J
8
Summary of Contents for RAMPE VITIFIX
