July-2015
38
– SERVICING –
7.2.2.2
Removing and fitting pipes
IMPORTANT
The following instructions must be observed:
• Always ensure that the pipes are clean.
•
The pipes must always be fitted so that in all circumstances,
◊ they are not subject to tension.
◊
there is no compression of short lengths.
◊ there are no external mechanical forces applied to the hydraulic pipes.
◊ Avoid rubbing, attach them correctly. If necessary, protect the pipes with protective sheaths
Protect sharp edges.
◊ the bend radii do not cause the pipes to be pinched.
CAUTION
Risk of damage to the soft pipes by tearing due to incorrect installation
Take photos before removing in order to restore the original configurationwhen installing.
Summary of Contents for RAMPE VITIFIX
