July-2015
39
7.3 - VERIFyING THE SETTINGS ON THE BOOM
DANGER
Risk of accidents from crushing or electric shock with the boom in movement!
• Do not stand close to the
boom while it is being
adjusted.
• Do not stand under the
boom while it is being
adjusted.
7.3.1 - GENERAL INFORMATION
Before making any settings, check the following points:
1. The
sprayer must be lubricated (see chapter
MACHINE MAINTENANCE
)
2. The
sprayer must be hitched to the
tractor.
3. Tractor and
sprayer must be on a flat surface.
4. The
boom must be unfolded.
NOTE
Refer to chapter "6.2 - POSITIONNEMENT DES ORGANES DE PulVÉRISATION", page 31
7.3 - SPECIFIC MAINTENANCE OPERATIONS ON THE BOOM
7.3.1 - GREASING
After each day of
treatment, grease the joints, rubbing surfaces, all ball joints and greasers.
IMPORTANT
If you clean your machine with a hight pressure
sprayer, re-grease the boom completely
afterwards.
7.3.2 - STOPS, PLASTIC AND RUBBER ROLLERS
Check the condition of these components regularly and replace them if there is any sign of wear.
7.3.3 - FILTERING
WARNING
Risk of accidents in the event of accidental contact with the mix!
Always wear gloves
Refer to the paragraph in chapter
USING THE MACHINE
of the manual for your sprayer, in order to
position the valves in such a way that the valves are secure.
Summary of Contents for RAMPE VITIFIX
