10 of 12
IU_Pulse_01_eng
User instructions
Pulse
Enter again the time delay and opening window values for confirmation.
The keypad beeps twice and the led switches off.
Time delay can be programmed in between 0 and 99 minutes, the open window in between
1 and 19 minutes.
Note
: it’s possible to reduce the time delay only during the open window counting
Lock reset
The reset operation will restore the system in pre-setup mode.
Disconnect the power supply. Press keys to discharge the excess current.
Connect the reset box on the secondary connector of the lock (BAT or 2).
Power up the reset box with a 9V battery. The keypad beeps twice.
Lock is reset.