6 of 12
IU_Pulse_01_eng
User instructions
Pulse
Users characteristics & default codes
Manager
optional Dallas key
Main user : open, program and change its own code.
Standard users
optional Dallas key
Users from 2 to 8 : opens and change their own code.
Override users
optional Dallas key
or
Dallas key only
User #9 : opens without time delay and changes its own code (or Dallas).
This user only opens in dual mode with Manager and standard users.
Overview functions
Lock opening
After entering an opening code, it is possible to open the lock within 3 seconds. It is not
necessary with motorized locks: in this case, the motor retracts the bolt which remains in the
open position for 8 seconds before returning to the closed position. In the manual closing
version, the bolt can be closed by pressing any key
Penalty
Four consecutive wrong codes initiate a four minutes penalty time. During this period, the LED
flashes once every 10s. Each time a key is pressed, a long beep is produced and no operation is
allowed.
Dallas keys
During the installation (function #1), a Dallas key (model 1982) can be associated to a user by
simply placing it in the Dallas reader after entering the ID and related code. The user is then
identified by numeric code + Dallas key.
Power supply
Lock can be powered with:
an ALKALINE 9V battery located in the battery compartement below the keypad;
an internal battery box provided by Tecnosicurezza (6 ALKALINE 1.5 batteries);
A power adapter (ref. N1212) with power supply interface (ref. T6005/W or T6005) both
provided by Tecnosicurezza.
Low battery warning
A series of beeps while opening indicates a low battery which should be replacing immediately.
Silent alarm
With this function enabled, if user enters an opening code an then increase the last digit by one
number (ex. 030304 instead of 030303): the lock opens and simultaneously the output of the
alarm interface is activated.
Audit
The lock is able to save the last 100 operations with user and operations description.