IU_Pulse_01_eng
9 of 12
User instructions
Pulse
Users status
Hold press
util the double beep. Led remains on.
Enter the Manager code (and the Dallas key if programmed). The keypad
beeps twice.
Enter the ID of the user to be verified.
A single beep (negative sound) is produced for available users (not
installed) or for disabled/deleted users.
A double beep is produced for installed users.
A long beep is produced for blocked users (not possible to install).
To close this function, wait for few seconds without entering any ID. A
long beep is produced. Then, the led switches OFF.
Audit/configuration download
Audit and configuration can be downloaded on a Dallas key previously programmed with
DiaLog software and they can be downloaded on a PC through the USB interface provided
by Tecnosicurezza.
Hold press
util the double beep. Led remains on.
Enter the Manager code (and the Dallas key if programmed). The keypad
beeps twice.
Insert the audit Dallas key into the reader and keep it in place (it is
recommended to use a magnetic Dallas key): the keypad beeps twice
and the download begins automatically.
Time delay and open window
Hold press
util the double beep. Led remains on.
Enter the Manager code (and the Dallas key if programmed). The keypad
beeps twice.
Enter a time delay value and an opening window value.
The keypad beeps twice.
