8
DESCRIPCTION MACHINE ROSCAMAT-500 (C-26 N)
The ROSCAMAT-500 can be supplied with an articulated head (C-26
N). This bracket of easy handling can be set in four different positions 90º
apart.
Orientable head:
1.-
Handle
2.- Milled nut
Vertical operations:
Place the motor in vertical position and lock the handle (1) and the milled
nut (2). The ROSCAMAT now is ready to work.
Horizontal operations:
Loose the milled nut (2) to unlock the joint of the motor.
Turn the head 90º till you reach the interlock, and then tighten the millet
nut (2) again.
Unlock the handle (1) located in the upper side of the head.
When moving the arm, the operator will have to manually maintain the
perpendicularity to the working plane.
Do not lock the handle (1) if you are working in horizontal operations.
