26
LCD Display List
LCD display
Discription
(Brand Name)
Display brand name.
(Model Number)
Vx.xx
Display model number and Vx.xx
：
firmware version.
Waiting…
The status of wind turbine system is normally, waiting for wind energy
feed-in, about 30sec.
LOW_WIND
When wind speed below 2.8m/sec, wind energy isn’t enough to feed-in
grid. The wind power inverter no power output.
record_No=xx
To show system fault record recently. When system is malfunction, there’ll
show corresponding fault record. If system power is off, the fault record
will reset.
Vs=xxxV
Is=xx.xA
Vs=xxxV
：
grid-tied voltage value(V).
Is= xx.xA
：
grid-tied current value(A).
Po=xxxxW
Wind power inverter output power into grid(W).
Vw=xxxV
Iw=xx.xA
Vw=xxxV
：
Wind power inverter internal DC bus voltage value(V).
Iw= xx.xA
：
Wind power inverter internal DC bus current value(A).
Pi=xxxxW
The wind power output from wind turbine, and feed-in wind power inverter
(W).
[UP]
Shift-up key
Shift-up key[UP] indicates cyclical moving upwards, display respectively
：
Input power (Pi)
Æ
Input voltage/current (Vw/Iw)
Æ
Output power (Po)
Æ
Output voltage/current (Vs/Is)
[DOWN]
Shift-down key
Shift-down key[DOWN] indicates cyclical moving downwards, display
respectively
：
Input power (Pi)
Å
Output voltage/current (Vs/Is)
Å
Output power (Po)
Å
Input voltage/current (Vw/Iw)
