12
User’s manual
- TECO 22 - 23 - 25 - 27 Special
STANDARD ACCESSORIES
044900800
.........................................................................................................................Tyre lever
040000100
.......................................................................................................................Brush (BR)
3-01523
................................................................................................................Grease 4Kg (TG4)
ACCESSORIES ON DEMAND
100012100
...........................................................................................................................
UWA 24
(Adapters to increase the turntable clamping capacity (to be used in combination with US TPH)
100012000
................................................................................................................................ UMA
Universal motorcycle adapters
100001500
.................................................................................................................................
CRA
Adapters for convex rims
8-11600005
............................................................................................................................. PLS 2
(Pneumatic wheel lift complete with roller rest)
SPECIFIED CONDITIONS OF USE
The TECO tyre changers has been designed exclusively for mounting and demounting tyres, using
the tools the machines are equipped with, following the instructions in this manual.
WARNING
Any other operation carried out on the machine is considered as improper use and shall be
construed as negligence.
These machines are equipped with an inflation system independent from any other function described
above. Take great care when using it (read the INFLATION chapter).
WARNING
You are strongly advised not to use equipment
or tools not originally manufactured by TECO .
Figure 8 shows the positions assumed by the operator
during the various stages of work with the machine.
A Bead breaker
B Tyre demounting and mounting
C Inflation area.
WARNING
Keep hands well away from machine moving
parts.
WARNING
To stop the machine in an emergency:
- disconnect the power supply plug;
- isolate the compressed air supply network by disconnecting the (quick-coupling) shut-off valve (fig. 6).
8
C
B
A
