4-17
4.4 Parameter Function Description
Group0- The basic parameters group
00-00 : Control Mode 0 : V/F mode 1 : Vector mode (General Purpose)
To select the appropriate vector control mode or V/F mode according to the load characteristics.
1.
If V/F mode is selected, please set parameters, group5 to comply with the load features.
Vector is best suited to control the general load or rapidly-changed torque load.
00-01 : Volts/Hz Patterns (V/F) = 0
～
18
1.00-01= 0
~
17, V / F Pattern. (Refer to group5)
2.00-01=18
，
Flexiable V/F pattern, programmable according to parameters 05-04
～
05-09.
00-02 :Motor rotation
= 0 : forward
1 : reverse
Note
：
when10-01is set to 1, 00-02 is not set to1
00-03 : Main Run Command Source Select
=0 : Keypad =1 : External Run/Stop Control
=2 : Communication
00-04 : Alternative Run Command Source Select
=0 : Keypad =1 : External Run/Stop Control
=2 : Communication
1. 00-03/00-04=0, the inverter is controlled by the keypad.
2. 00-03/00-04=1, the inverter is controlled by the external terminals, and the Stop key for emergency
stop is operational. (Refer to 04-02 description)
※
Note: 00-03/00-04=1,please refer to parameter 04-03
，
04-04
，
04-06
，
04-07 for detailed description
in order to ensure safety of operators and machines.
3. 00-03/00-04=2, the inverter is controlled by Communication.
4. When 01-00 ~ 01-05 is set 10
（
Main/Alt Control Signal Select
）
,if the terminal is ON, the inverter is
controlled by parameter 00-03,if the terminal is Off, the inverter is controlled by parameter 00-04.
00-05 : Main Frequency Command Source Select
=0 : UP/DOWN of Keypad
=1 : Potentiometer on Keypad
=2 : External AVI Analog Signal Input
=3 : External Up/Down Frequency Control
=4 : Communication setting Frequency
00-06 : Alternative Frequency Command Source Select
=0 : UP/DOWN of Keypad
=1 : Potentiometer on Keypad
=2 : External AVI Analog Signal Input
=3 : External Up/Down Frequency Control
=4 : Communication setting Frequency
1. Please refer to description of parameter group 01-00
～
01-05 (multifunction input terminals) for
the function Up/Down terminal.
2. The priority in reading frequency is Jog> preset speed>
▲▼
on keypad or Up / Down or
communication control.
3. When 01-00 ~ 01-05 is set 14
（
Main/Alt Frequency Command Select
）
,if the terminal is ON, the
inverter frequency command is set by parameter 00-05,if the terminal is Off, the inverter
frequency command is set by parameter 00-06.
