4-20
※
Note
：
1.As 3 wire control mode is selected, the terminal S1, S2 and S3 is not controlled
by 01-00, 01-01 and 01-02.
00-12 : Jog Frequency (Hz) =1.00 ~
400.00
00-13 : Jog Acceleration Time (MFIT) (S) =0.1 ~
25.5
00-14 : Jog Deceleration Time (MFIT) (S) =0.1 ~ 25.5
Example
：
When 1-00(S1)=5
，
1-01(S2)=6 (Jog), Jog run is controlled by external terminals, S1 on is
Jog-forward, S2 on is Jog-reverse.
Group1- External terminal digital signal input function group
Multifunction input terminals (TM2 S1
～
S6) controlling
：
01-00~05:
0 : Forward/Stop Command
1 : Reverse/Stop Command
2 : Preset Speed unit 0 (3-02)
3 : Preset Speed unit 1 (3-03)
4
:
Preset
Speed
unit
2
(3-05)
5 : JOG Forward Command
6 : JOG Reverse Command
7 : Acc/Dec time 2
8 : Emergency Stop
9
:
Base
Block
10 : Main/sub Control Signal Select
11
:
Acc/Dec
Disabled
Figure 4-7 Drive start/stop operation sequences
