TECO Seachill TR30 Installation Manual Download

Page: 4 / 7

HEATER INSTALLATION GUIDE

Turn off and unplug the chiller.

Remove screws from housing. Slide housing about

8" (20cm) back.

Unplug green ground wire from housing. Slide the

housing off.

Keep the plastic washers that come with

the housing screws, these prevent chipping of the
housing powder coat.

Slide Housing completely off.

Do not operate the

chiller until housing is replaced.

STEP 1

Summary of Contents for Seachill TR30

Page 1: ...SUPPLEMENTAL INSTRUCTIONS FOR TR30 TR60 HEATER INSTALLATION GUIDE ...

Page 3: ...Contact Us North American distributor TECO US Service service tecous com Sales sales tecous com www tecous com ...

Page 4: ...de housing about 2 8 20cm back Unplug green ground wire from housing Slide the 3 housing off Keep the plastic washers that come with the housing screws these prevent chipping of the housing powder coat Slide Housing completely off 4 Do not operate the chiller until housing is replaced STEP 1 ...

Page 6: ...EATER INSTALLATION GUIDE STEP 3 Pull the heater plug through the hole in the frame 1 Connect two pin adapter on wiring harness to one of 2 the available two pin connectors mounted on top of support strut ...