TECO TBF134WMDB, User Manual

TRANSPORTING THE APPLIANCE

1.The appliance must be transported only in a vertical position. The 
packing must be intact during the transportation. 

2. When unpacking and re-packing the appliance, please memorise the 
position of each accessory of the appliance when unpacking it. When 
re-packing the appliance for transportation, ensure all accessories are 
secured before transportation.

3. Do not lift or pull the door during transportation

4. When moving the appliance, do not tilt >45 degrees 
(the angle of the vertical direction). Please avoid strong 
vibration and impacts that could cause damage to the 
appliance.

5. The refrigerator should be located on a 

fi

 rm and 

fl

 at surface. An uneven 

surface may cause excess operating noise or vibration. 
 

(a) The noise may be increased if the 

fl

 oor is not 

fi

 rm.

(b) If the appliance is to be positioned on carpet 

fl

 ooring and heat

      emitted from the appliance is a concern, place a solid sheet 

      under the appliance.

6. Choose a location which is not exposed to sunlight, high temperature or 
humid, as humidity may cause staining.

7. It is recommended a clearance of at least 100mm away 
from objects and walls on both sides and back. Ensure the 
clearance above the appliance is not less than 200mm and 
160

° 

clear for the door to swing open.

8. If the appliance is unstable, rotating either of the front two legs in a 
clockwise direction will raise the appliance.

9. When adjusting the front legs, ensure the 
appliance slopes backwards slightly for keeping the 
door closed. 

10. Remove all internal packaging before operating

200mm

50mm

50mm

5