10
CAUTION
Symptom
Solution(s)
The dehumidifi er does not operate
Ensure the power is ON.
Check the power cord. Ensure it is securely
plugged in and switched on.
Check the power supply to the house. Ensure
the fuse has not blown or if the safety switch
has been activated.
Check the water tank is empty and correctly in
position.
The appliance is not reducing the
humidity
Check the fi lter is not dirty or contaminated.
Check the air inlet and outlet are not
obstructed.
Check the room humidity is above what the
dehumidifi er is set to.
Check that no doors or windows remain open.
Remove objects or devices that may be
producing or increasing the room’s humidity.
The dehumidifi er is too noisy
Check that the dehumidifi er is placed on a fl at,
stable and secure surface.
The dehumidifi er is leaking
Check that the dehumidifi er is in good
working order and the cabinet and water tank
is not cracked.
NOTE
: If problems persist, switch off the dehumidifi er and unplug from the main power source.
Contact TECO Australia Service as soon as possible. Never attempt to repair the appliance.
It is hazardous for anyone altering, repairing or servicing the dehumidifi er.
Only an Authorised Service Person can carry out servicing or repairs to this appliance.
IF SERVICE IS REQUIRED
:
If you have a problem, and the problem persists after you have made the checks mentioned above, contact:
TECO Australia’s Service on
1300 660 037
during business hours (8.30am – 5pm AEST).
For warranty details please visit
www.teco.com.au
The dehumidifi er does not collect
water
The humidity is low.
The temperature is low.
TROUBLESHOOTING
Summary of Contents for TD-12M1
Page 2: ......
Page 14: ...www teco com au HBB PV ...
