IG6600 Quick Installation Guide
- 1 -
Content of Package
z
IG6600
Gateway
z
Main
stand
z
Antenna
z
Power
adapter
z
Ethernet
cable
z
Quick Install Guide
Installation
1. Connect the power cable of power supply to the 12 VDC jack on the rear of
IG6600
.
Turn on the power switch on power cord without connecting any telephones. When the
power LED stops flashing the
IG6600
will be fully powered up and operational.
2. Connect your PC or laptop to the LAN port of the IG6600 using an Ethernet cable.
3. Open your web browser and enter 192.168.1.1 in the address field, and press enter.
When prompted enter the user name, which is “admin1234” and password which is
123456.
4. IG6600 provides three levels for access to the programming and diagnostics through
the browser.
To prevent potential security exposures from Internet, we strongly
recommend you change all of the system’s passwords.
To change the password, log in as the user name “admin1234” and go to:
Management --> Access Control --> Password
Default Login and Passwords:
Access Level
User name
Default Password
New Password
Dealer admin1234
123456
Administrator support
support
User
user
user
5. The Setup Wizard starts automatically when the
IG6600
is powered up for the first time.
It is strongly recommended following the step-by-step instruction to configure most basic
settings that enable you to quickly configure your
IG6600
.
6. Use the provided Ethernet cable to connect the
IG6600
WAN port to your network router
or network switch, depending on your network configuration choice.
7. Connect your
IP2061
telephones to the same router or switch as IG6600 is connected,
one at a time. The
IP2061
telephone will automatically register to the IG6600 and get a
valid extension number from
IG6600
.
Network Configuration
The
IG6600
can be installed several different ways. Installing the
IG6600
these ways as
below will allow the system to synchronize the time and date from the Internet and if
wanted connect low cost Internet SIP Telephone lines.
Summary of Contents for IG6600
Page 5: ...IG6600 ...
