IG6600 Quick Installation Guide
- 2 -
Connecting to an Existing Network:
Connect the WAN port of your
IG6600
to the existing network, leaving the LAN port
disconnected after using it for the initial installation programming. (You need to enable
UPnP server setting in router or setup router’s DMZ to
IG6600
.)
Remote Phones Connecting to an Existing Network:
Obtain a static IP address from your Internet Service Provider (ISP) or use dynamic IP
address with Dynamic DNS. (Please check
IG6600
Administration Guide for the further
information.) Connect the WAN port of your
IG6600
to ADSL/Cable modem via an
Ethernet Switch and enter the Static IP address in the WAN programming of the
IG6600
,
without connecting the LAN.
IP2061
should be pre-configured SIP Proxy settings as
IG6600
’s WAN IP address. (Please check IP2061 manuals for the further information)
Summary of Contents for IG6600
Page 5: ...IG6600 ...