IG6600 Administration Manual
Page
86 of 139
6.7.3.1 Numbering Plan
Figure 6-74. Voice
–
System
–
Numbering Plan
This page allows you to configure extension number range. You can also define some
special service numbers in the table. (Figure 6-74)
Start extension
: It
’
s the start phone number of system internal extension. All valid
extension number can
’
t be smaller than it.
End extension
: It
’
s the end phone number of system internal extension. All valid
extension number can
’
t be greater than it. If receiving an IP20xx
’
s Plug & Play
request, IG6600 will allocate the first unused number from this limited region.
FXS Phone Number
: It determines the FXS phone number.
Operator speed-dial number
: If dial this number, the operator extension will be
called. The length is limited on 1 character.
When you press the
“
Configuration
”
button, the operator-related settings can be
configured: (Figure 6-75)
