WM5030M-OD USER MANUAL
17
1.4.6. Scanning List
Figure 17 illustrates current channel setting. User can set the all bandwidth simultaneously. This
setting affects the availabilities of each channel. The available state of each channel is shown on last
column of the table.
Figure 17.
Scanning List
Frequency: Input the required frequency.
Bandwidth: Input the required Bandwidth, e.g. 3MHz / 4.375MHz / 5MHz / 6MHz / 7MHz /
8.75MHz / 10MHz.
Duration: Choose the required Duration, e.g. 5ms / 10ms.
ID: Input the required Identity
Note: A channel can not be added when WiMAX modem is scanning state. Press “Disconnect” to stop.