WM5030M-OD USER MANUAL
21
Identity
MS identity is for the outer EAP round.
Inner Identity
MS identity is for the inner EAP round which only applies to EAP TTLS. To enhance privacy, an inner
‐
identity can be different from the outer identity, which is insecure.
Password
It’s a shared secret that can be used during the inner EAP round and only applies to EAP TTLS.
‐
CA Certificate
It’s a certificate to authenticate BS, either directly or by chaining.
User certificate
It’s MS public certificate. The User needs to duplicate user certificate if certificate and user key are in
the same file.
Decryption Key
It’s MS private key, if not included within MS user certificate. The key depends on the file format and
only applies to EAP-TLS. User needs to duplicate user key if user certificate and key are in the same
file. The user key field can not be empty.
Decryption Key File Password
Password: It’s optional password protection for MS’ private key.
Figure 19 and Figure 20 illustrate EAP’s setting. User can select Enable Authentication to enable
authentication, select authentication type, and then press “Apply” to save settings. To upload a
certification file, user has to browse and select the file by pressing “Browse…”, then press “Upload”.
Press “Apply” to save text input. Changes will take effect after pressing “Reconnect” button.
Note: The above figures are just for example. For using the WiMAX service, please use the correct
authentication type and user information that ISP provides for the authentication setting.