3.3 Boot options
There are four boot options while turning on the printer.
Light color
Function
Red
Blue
Purple
flickering
Red
flickering
Purple
flickering
Blue
Blue
1. Run gap detection
Keep pressing FEED
key while turning on
the power
release
2. Run gap detection
then print self test
and go to dump mode
Keep pressing FEED key while
turning on the power
release
3. Revert to default
setting
Keep pressing FEED key while turning on the
power
release
4. Skip to load
AUTO.BAS Program
Keep pressing FEED key while turning on the power
release
3.3.1 Label gap detection
When loading a different label, or to recover the default setting of the printer, we need to
run the paper gap detection for register the size of the new label. Some models have the
ability to auto-detect paper gap, so it doesn’t need to be done manually.
Follow the steps below to run paper gap detection.
1. Turn off the printer.
2. Load the labels into the printer.
3. Press down the FEED key (don’t release) then turn on the printer.
4. Release the button while the light colour is flickering Red.
3.3.2 Self-testing and dump mode.
Self-testing is used for verifying the print quality and settings.
