ENGLISH using TecraM1online.dot –– Printed on 24.02.2003 as 02_200UK
Operating Basics
4-2
Tecra M1
You can also tap the Touch Pad to perform functions similar to those of
the left button.
Click:
Tap the Touch Pad once
Double-click:
Tap twice
Drag and drop:
Tap to select the material you want to move. Leave your
finger on the Touch Pad after the second tap and move the material.
Using the AccuPoint
To use the AccuPoint, simply push it with your finger tip in the direction
you want to move the on-screen pointer.
Two buttons above the Touch Pad work in the same way with the
AccuPoint as they do with the Touch Pad. Refer to the
Using the Touch
Pad
section for details.
AccuPoint precautions
Certain conditions can affect the on-screen pointer when using
AccuPoint. For example, the pointer may travel contrary to AccuPoint
operation or an error message may appear, if
■
You touch the AccuPoint during power-up.
■
You apply constant, soft pressure during power-up.
■
There is a sudden temperature change.
■
Strong stress is applied to the AccuPoint.
If an error message appears, reboot the computer. If an error message
does not appear, wait a moment for the pointer to stop, then continue
operation.
Replacing the cap
The AccuPoint cap is an expendable item that should be replaced after
prolonged use. A spare AccuPoint cap is supplied with the computer.
1. To remove the AccuPoint cap, firmly pinch the cap and pull it straight
up.
