ts64a001
21
Maintenance
Maintaining ventilation
Your interactive flat panel requires ventilation to enable the cooling
-
fans to function. Dust buildup in the ventilation holes compromises
cooling and leads to product failure.
• Avoid setting up or using your interactive flat panel in an area with
excessive levels of dust, humidity or smoke.
• Clean accessible ventilation holes monthly with a dry cloth. Use a
vacuum cleaner with a narrow hose end fitting to clear the back
ventilation holes annually. You might have to remove the interactive
flat panel from your wall.
Preventing condensation
• Your interactive flat panel screen contains layers of glass that can
collect condensation, especially in the following conditions:
• Temperature extremes with high humidity
• Rapid changes in humidity, which can occur when you operate the
product near water, such as a sink, pool, kettle or air conditioner
ventilator
• Direct exposure to sunlight
To evaporate condensation from your interactive flat panel
1. Remove the humidity source from the interactive flat panel,
if possible.
2. Adjust the room temperature to normal operating ranges.
3. Turn on the interactive flat panel for 2–3 hours.
If the screen condensation doesn’t evaporate, contact TAG Support
http://www.tecslate.com/contactsupport