Installing batteries
2. Press the [POWER] button to turn on/off the radio.
Note:
If the radio is unable to be turned on. Please check if the batteries were installed correctly,
battery capacity is sufficient or the lock function had been applied with "
" displays
on screen (press & hold the [
] button to unlock.)
TUNE IN STATIONS
Press the [POWER] button to turn on your radio, then select your desired band by
pressing the [FM], [MW]
、
SW[
] or [ ] button. In case of receiving FM/ SW
broadcasting, fully extend the telescopic antenna for a better reception. When receiving
MW(LW) broadcasting, please rotate the radio or change it's location to achieve optimum
reception. You can rotate the [VOLUME] knob to adjust to appropriate volume from 0 to 30
levels.
Now, you can turn into your favorite stations with any of the below tuning methods:
METHOD 1: ETM (EASY TUNING MODE)
ETM is the unique tuning method designed by Tecsun. It skillfully combines the reception
circuitry & control procedure to pre-select the suspected radio station and temporarily auto
stores them into the ETM memory (not the regular 550 memories). This highly enhances
the efficiency when tuning into radio stations. Employing ETM to tune preferred
