HM80-155162E Page 7 of 11
Engine Parts List #2
Ref # Part Number
Qty
Description
74
31855
Retainer, Bearing
97
Lockwasher, Heavy split, #10 (Buy loc ally)
131
650802
Screw, 1/4-20 x 5/8" (Use as required )
131
650737
Screw, 1/4-20 x 1/2" (Use as required )
131
650738
Screw, 1/4-20 x 5/8" (Use as required )
174
650128
Screw, 10-24 x 1/2"
174
650597
Screw, 10-24 x 5/8"
227
730127
Air Cleaner Ass'y. (Incl.238,239,240,241,243,245 & 370)
(Use as required)
227
730164
Air Cleaner Ass'y. (Incl. 238, 239, 240, 241, 243 & 245) (Use
as required)
228A
650824
Stud, 1/4-20 x 7.33 (Use as required)
228A
650851
Stud, 1/4-20 x 8.1 (Use as required) (Used with drilled thru
elbow)
239
27272A
* Gasket, Air cleaner
239
27272A
* Gasket, Air cleaner
241
33266
Bracket, Air cleaner
242
33267
Bracket, Air cleaner
243
28820
Screw, 10-32 x 1/2"
245A
34700
Element, Air cleaner
245
33268
Element, Air cleaner
250B
33269A
Cover, Air cleaner
251
650513
Nut, Wing, 1/2-20
274
35865
Gasket, Exhaust (Use as required)
275C
35824
Muffler (Optional quiet muffler)
275B
391026
Muffler (Incl. 284, 284A & 416A) (This spark arresting muffler
can be used on any model.)
277A
650696
Screw, 5/16-18x2-3/4" (Used with 276A )
277
650729
Screw, 5/16-18 x 3-3/16"
292
26460
Clamp, Fuel line (Use as required)
298
650665
Screw, 1/4-15 x 7/8"
370J
34870
Decal, Instruction Can be used on HM80 with diecast starter.
370B
34387
Decal, Instruction Can be used on HM80 with stamped steel
recoil starter.
395
33329D
Starter Motor Kit (110-120 Volt) This 110-120 volt starter
motor kit may have been added to this engine. It can be
added only if cylinder hasdrilled and tapped starter mounting
bosses and a ring gear flywheel. Refer to service number
stamped on end cap of motor, or on decal for identification.
Ref
408
35570
Screen Seal (Can be used on HM80 with stamped steel
recoil starter)
409
35569
Spacer (Can be used on HM80 with stamped steel recoil
starter)
410
730573
Debris Screen Kit (Incl. 360, 370B, 387, 411 &413) (Can be
used on HM80 with stamped steel recoil starter)
411
35568
Debris Screen (Can be used on HM80 with stamped steel
recoil starter)
413
650907
Screw, 5/16-18 x 1-5/8" (Can be used on HM80 with
stamped steel recoil starter)
