181-630-14
Four-Cycle Engine • L-Head • Horizontal Crankshaft • Air-Cooled
Page 3
II. How to Get Service
For engine adjustments, repairs or warranty service not
covered in this manual, contact your nearest Authorized
Tecumseh Servicing Dealer. Find them on our website at
www.TecumsehPower.com or call Tecumseh Power
Company at 1-800-558-5402.
A. Engine Identification Decal
A sample engine identification decal (See Figure 5.)
indicates the engine’s model number, specification of
engine and the date of manufacture (D.O.M.). Please look
at the decal on your engine and fill in this information in the
spaces provided for future reference.
The engine identification decal also includes engine life
specifications for the emissions-related useful life period of
your engine. This period relates to the emission compliance
life as certified by EPA and/or CARB. To find the life period
specification for your engine, please look on your engine’s
decal and find the letter enclosed by quotation marks
between the words MODERATE and LIFE PERIOD. Match
one of the following letters with the letter printed on your
decal. For example, LH models are designated as “C” 250
hours, “B” 500 hours, and “A” 1000 hours.
B. Tecumseh Technician’s Handbooks
If you have a general understanding of internal combustion
engines and wish to repair and service your engine and/or
engine emission control systems yourself, a Technician’s
Handbook is available from your Authorized Tecumseh
Servicing Dealer. See Figure 6. This handbook covers
repairs and adjustments not covered within this Operator’s
Manual, and it is intended for individuals who have had
adequate training, experience and who practice proper tool
usage. Service procedures should be clearly understood
and practiced when servicing Tecumseh Engines. Order as
part no. 692509 for LH Models.
Tecumseh manufactures and is responsible only for the
engine used on this power equipment. If repair or service is
needed for anything other than the engine, contact the
service source recommended by the equipment
manufacturer.
III. Oil and Fuel Specifications
A. Oil
To operate engine you need to use a clean, high quality,
detergent oil. For recommended engine oil, See Table 1.
NOTES
Be sure original container is marked A.P.I. Service “SL/SJ”.
Using multigrade oil above 32°F (0°C) will increase oil
consumption. SAE10W40 is not recommended.
Tecumseh special-formulated oils are available at your
Authorized Tecumseh Servicing Dealer.
The oil sump capacity is 26 ounces or 1-5/8 U.S. Pints (.76
liters).
Table 1. Recommended Oil Usage
Register Your Tecumseh Engine
Maintenance Tips
Parts Look-Up System
Great Tecumseh Apparel
Nearest Authorized Tecumseh Servicing Dealer Location
Visit our web site at
www.TecumsehPower.com
LOG
ON!
Figure 5. Engine Identification Label
Figure 6. Technician’s Handbook
TECUMSEH POWER COMPANY
THIS ENGINE MEETS 1995-2005 CALIF & US EPA
PHI APPLICABLE EMISSION REGULATIONS FOR SI
SORE ENGINES
LV195EA
361540D
4TPXS.1951BB
195
04015AA0001
EM
2083
ENGINE
MODEL:
SPEC:
D.O.M.:
3 TO 11 HP
4 -CYCLE
L-HEAD
ENGINES
TECHNICIAN'S HANDBOOK
-20 F
O
32 F
O
32 F
O
40 F
O
-20 C
O
20 F
O
40 C
O
30 C
O
20 C
O
10 C
O
0 C
O
-10 C
O
-30 C
O
0 F
O
60 F
O
80 F
O
100 F
O
Straight Grade
730225A or SAE 30
Tecumseh Part No.
Multi Grade
730226A or SAE 5W30 or SAE 10
Tecumseh Part No.
Synthetic
730263 or SAE 0W30
Tecumseh Part No.
Tecumseh Recommended Oil Usage
