- 8 -
1. Top cover
2. Upper hinge
3. Screw
4. Restricted block
5. Door
6. Lower door hinge
7. Pin
8. Screw
9. Pin cap
10. Cabinet
1. Remove the screws (8) that hold the top cover (1), then push out the top cover from the
restricted block (4)
2. Remove the screws (3) and the upper hinge (2), keep the hinge for later use.
3. Remove the door (5) from the upper hinge (2), and keep the padded surface upwards to
prevent the scratching.
4. Remove the screws (3) that hold the lower door hinge (6), then remove the pin (7) from
the lower door hinge, keep the hinge for later used.
5. Insert the pin (7) previously moved from the right side and transfer it into the other hole
at the left lower side of the door.
6. Insert the lower door hinge (5) in the left lower side, fix the lower hinge on the cabinet
(10) by tightening the screws (showing the assembly instruction of the low hinge with the
door opening at the right side & left side as below).
1
2
3
4
6
8
7
9
5
3
10
files without this message by purchasing novaPDF printer (
