FOR EXTRA SECURITY:
The optional swing control mechanism provides
extra security.
The swing control mechanism MUST be used to
prevent the gate from swinging into a hazard
such as over stairs or into a heavy traffic area.
1. Mount the gate according to instructions.
2. Determine the direction you want to prevent
the gate from swinging.
3. Attach the swing control mechanism to the
top rail with the solid surface of the swing
control mechanism toward the direction of
the hazard, i.e. the direction you want to
prevent the gate from swinging.
4. The optional swing control mechanism
should not be used in place of the latching
mechanisms.
Always keep the latching mechanism securely
engaged when using the gate. Remove the
gate from opening when not in use.
OPTIONAL SWING CONTROL
JOINING SWING GATES
• Wash gate with mild soap and warm water and dry thoroughly before using.
• Metal and plastic parts can be wiped clean with a soft damp cloth and dried with a soft cloth.
Never clean with abrasive, ammonia based, bleach based or spirit type cleaners.
• An occasional drop of vegetable oil may reduce wear and tear on moving parts.
• Any additional and replacement parts should be obtained from Tee-Zed Products.
CARE & MAINTENANCE
#10 x 1.25 cm (1/2in)
Screws (x2)
Timber gate with metal and plastic parts.
Plastic parts: Nylon & Polyoxymethylene (POM) materials.
157 - 220cm
(61.8 - 86.5in)
130.5 – 175cm
(51.25- 68.75in)
CONTACT DETAILS
Tee-Zed acknowledges that its customers may be entitled to statutory
consumer guarantees and does not seek to exclude or limit them. These
guarantees include that Tee-Zed’s products are of acceptable quality.
This Tee-Zed product is for the specific purpose detailed in the
instructions and packaging and Tee-Zed considers use outside of that
purpose to be abnormal use. To the maximum extent permitted by law,
Tee-Zed does not accept any liability for damage:
• arising from abnormal use of the products;
• caused by installation or removal of the products other than in
accordance with the supplied installation and removal instructions; or
• arising under the law of tort or contract.
Dreambaby
®
products by
Made in Jiaxing, China. ©2015 Tee-Zed Products Pty Ltd
COMPOSITION
Tee-Zed Products Pty Ltd,
PO Box 2022, Bondi Junction NSW 1355
Australia Tel: +61 (0)2 9386 4000
info
@
tee-zed.com.au
Tee-Zed Products (N.Z.) Ltd
PO Box 64013, Botany Town Centre, Auckland
New Zealand Tel: +64 (0)9 274 8788
info
@
tee-zed.co.nz
Tee-Zed Products Ltd
PO Box 29227, Dunfermline, KY12 2DN
United Kingdom Tel: +44 (0)844 800 9445
info
@
tee-zed.co.uk
www.dreambaby.com.au
www.dream-baby.co.nz
www.dreambaby.co.uk
www.youtube.com/dreambabytv
www.facebook.com/dreambabysafety
www.twitter.com/dreambabysafety
4
