After the aircraft successfully pairs, the remote control camera
button presses for about 5 seconds, the remote control drops,
the aircraft lights flash quickly, and the aircraft is picked up 3
meters from the ground level in a clockwise direction, and the
remote control drops after a click. The aircraft is erected, the
camera is facing down, and the clockwise rotation of the aircraft
lights for 3 seconds in a clockwise direction can be changed. At
this point, you can search for the GPS signal. After the light is on,
you can control the aircraft to unlock and take off. If you don't
need GPS signal, you can take off directly.
Tips: Please ensure that the take-off environment is empty and
the satellite signal is greater than 7 stars before take-off.
● Do not calibrate in areas with strong magnetic fields, such as
magnets, parking lots, building areas with underground
reinforcement, etc.
● When calibrating, do not carry ferromagnetic materials such as
keys, mobile phones, etc. with you.
● Do not calibrate near large pieces of metal.
After the QR code on the mobile device scanning APP manual is
downloaded and the APP is downloaded, the WIFI function of
the mobile device is turned on, and the XL-4K-5G-********* is
selected in the WIFI list to exit the interface and open. APP.
Note: At this time, the remote control is turned off, and the
mobile APP will connect the aircraft to control the aircraft in about
5 seconds. If the aircraft is not connected to the remote control
after the power is turned on, the remote control can not directly
match the aircraft with the mobile phone.
Connect APP
(mobile phone needs to support 5G-WiFi signal function)
-14-
