1
Startup .........................................................01
Charging ......................................................01
Four connection modes ...............................01
-2.4 wireless Mode ......................................02
-USB wired Mode ........................................02
-BLE Wireless Mode ....................................03
-USB serial Mode ........................................06
LED indicator and beep ...............................06
Function Setup ............................................07
Language Setting ........................................07
Setting for Prefix/Suffix
................................09
Auto Power Off ............................................12
Software Version Number............................ 14
Inventory mode ............................................14
Product Specification
...................................17
FAQ .............................................................18
Warranty ........................................ Back cover
1. Startup
Power on:
Press scan button 3 seconds, TMCT-80 will
power on with a long beep.
Power off:
In normal working situation, press scan button 3
seconds, TMCT-80 will power off with two beeps.
Note:
TMCT-80 will start sleep mode if there is no
operation on it over 5 minutes. Short press on the
trigger can wake it up.
2. Charging:
To charge the device, connect the scanner with
any USB charging adapter or active USB port by
using the charge cable. The RED LED will turn
on during charging and will be turned off when
fully charged. The scanner can be fully charged in
around 4 hours.
3. Four connection modes:
TMCT-80 supports 4 transmission modes, USB
keyboard, USB serial port, 2.4 G wireless and
BLE wireless.
I. USB transmission is the highest transmission
grade, so data transmission through USB
mode is the priority even it is connected to a
device wireless.
II. 2.4G wireless and BLE wireless can switch
easily by scanning program barcodes.
User of TMCT-80:
