EN
Owner’s manual
10
INSERTING AND REMOVING COMBS
Notes:
• Make sure the appliance is turned off before connecting it to the power supply.
• It takes about 2,5 hour to fully charge the device what provides
about 4 hours of run time.
1. Connect one end of the AC adapter to the power supply socket.
2. Connect the other end to the appliance’s power socket.
3. When the appliance is charging, red LED is on.
4. When the appliance is fully charged, green LED is on.
CHARGING
OPERATION
Notes:
•
Make sure that the appliance is turned off when attaching or removing the combs.
•
The set includes four guides, each of them having different cutting lengths- 3, 6, 9 and
12 mm.
1. Choose the desired comb.
2. Attach the comb on the back of the blade and slide it downwards until it locks in place.
3. Remove the comb from the blade by pushing it upwards.
1. Slide the Power switch upwards to turn on the appliance.
Note: If you want to use the appliance with a comb attached, do it before turning on
the appliance (see “Inserting and removing combs” section).
2. Keep holding the button of the cutting length switch and simultaneously slide it
