Owner’s manual
12
EN
OFF (0) before assembling the device.
• Speed control: Adjust the speed by rotating the speed control knob (from 0 to 6, the
higher the number, the higher the speed).
◦
0: off
◦
P: pulse
KNEADING/BEATING/WHISKING
1. Press the release button. Tilt up the multifunctional head. Insert the lid on the head of
the device.
2. Place bowl in bowl base and turn clockwise until bowl locks into place.
3. Insert bowl attachment onto output shaft and press upward as far as possible.
4. Turn the attachment counterclockwise, hooking attachment over pin on shaft.
5. Plug device into wall outlet. Select desired speed.
6. When finished, rotate speed control to Off (0). Unplug from power supply mains.
7. Press the release button. Tilt mixer head up.
8. Remove bowl attachment by pressing attachment upward as far as possible. Turn the
attachment clockwise and pull to remove.
9. Remove bowl by turning the bowl counterclockwise and pull to remove.
Notes on using the bowl attachments:
• Make sure the knob is at 0 position and disconnected from power supply mains before
attaching the whisk, beater or dough hook.
Summary of Contents for TSA3545-B
