background image

1

WARNING

!

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE TEETER POWER10

SAVE THESE INSTRUCTIONS

BEFORE YOU BEGIN:

 Review all steps before beginning assembly and read all precautions before using the Teeter Power10

 .  

Carefully adhere to the Assembly Instructions and User Guide to help ensure safety and product integrity . 

FAILURE TO FOLLOW INSTRUCTIONS AND WARNINGS COULD RESULT IN SERIOUS INJURY OR DEATH. 

To reduce the risk of injury: 

• Read and understand all the instructions, review all other accompanying documents, and inspect the equipment before use .  

It is your responsibility to familiarize yourself with the proper use of this equipment and the inherent risks of exercise equipment 

if these instructions are not followed, such as, pinching, entrapment, equipment failure, or aggravating a pre-existing medical 

condition . It is the responsibility of the owner to ensure that all users of the product are fully informed about the proper use of 

the equipment and all safety precautions .

• 

ALWAYS

 consult with your doctor before beginning any exercise or weight-loss program, especially if you are over the age of 

35 or have any known pre-existing medical problems . This may include injury or illness, but also the side effects of any drug or 

supplement (prescribed or over-the-counter) . 

• The instructions and advice presented in this User Guide are in no way intended as a substitute for medical advice or counseling .

• 

DO NOT

 continue using the equipment if you feel pain, discomfort, shortness of breath, chest tightness, or become 

light-headed or dizzy while exercising . STOP and seek medical advice . Call 911 if you are having an emergency health condition . 

• 

DO NOT

 use if you are over 300 lbs . (136 kg) . Structural failure and physical injury could occur . 

• 

ALWAYS

 ensure that all adjustable features are accurately adjusted to the users’ body proportions and all parts are fully tightened 

and secured before use . 

ALWAYS

 secure both feet to the Foot Platform with the Foot Straps when in use . 

ALWAYS 

hold the 

Handles when mounting or dismounting . 

• 

DO NOT

 place hands or feet near linkages while in use . The linkages are flywheel driven and can cause serious injury, 

entrapment, or death . 

DO NOT

 allow pets or children to approach the linkage while it is moving . 

• 

DO NOT

 place any objects within a 24” (61 cm) radius of the machine . Do not place any objects or body parts behind the pivot 

area Rear Linkage Assembly or Handles .

• 

ALWAYS

 reduce rowing speed in a controlled manner . Handles and Seat continue to move when you stop rowing .

• 

ALWAYS

 set the resistance level to the maximum while not in use to prevent unintentional movement of the equipment .

• 

DO NOT

 allow children to use this machine . Keep children, bystanders, and pets away from machine at all times and 

DO NOT

 

allow children to be left unattended in the same room as the equipment . The equipment is not intended for use by persons 

with reduced physical, sensory or mental capabilities, unless they are given supervision and instruction concerning use of the 

machine by a person responsible for their safety .

• 

ALWAYS

 wear appropriate clothing while exercising with the machine . 

DO NOT

 wear loose clothing that could get entangled 

in the equipment . 

ALWAYS

 wear athletic shoes to protect feet while exercising with the machine . 

• 

ALWAYS

 store indoors and on a level surface . This equipment is not intended for outdoor use .

• 

DO NOT

 use in any commercial, rental or institutional setting . This product is intended for home-use only . 

• 

ALWAYS

 use this equipment only for its intended use as described in this manual . 

DO NOT 

use attachments not 

recommended by manufacturer . 

• 

DO NOT

 drop or insert any object into any opening or place any sharp objects near the equipment . Keep body parts, hair, loose 

clothing and jewelry clear of all moving parts . 

• 

DO NOT

 operate equipment while under the influence of drugs, alcohol, or medication that may cause drowsiness or disorientation .

• 

ALWAYS

 inspect the equipment prior to use . Make sure all fasteners are secure and adjustable settings are secure .

• 

ALWAYS

 replace defective components immediately and/or keep the equipment out of use until repaired .

• 

ALWAYS

 position equipment on a level surface and away from water or ledges that could lead to accidental immersion or falls .

• 

ALWAYS

 use a damp cloth when cleaning . 

DO NOT

 use abrasive soaps or solvents to clean as this could cause damage to the machine .

• Refer to additional warning notices posted on the equipment . If a product label or User Guide should become lost, damaged or 

illegible, contact Customer Service for replacement .

Summary of Contents for Power10

























Reviews: